Accessing Other Partitions; To Access Another Partition; Global Arming - Honeywell ADEMCO VISTA-40 User Manual

Accessing Other Partitions

To Access Another Partition

Each keypad is assigned a default partition for display purposes, and will
show only that partition's information. But, if the user is authorized, a
keypad in one partition can be used to perform system functions in the other
partition, by using the GOTO command. Note that only the partitions
authorized and programmed by the installer can be accessed in this manner.
To GOTO another partition:
1. Enter your security code, then press
Entering partition number 0 will return the keypad to its original
partition.
LOG-ON TO
2.
PART. X COMPLETE

Global Arming

The Global Arming option may be assigned for use by some users. If Global
Arming was enabled for use with your security code, a keypad prompt
(message) shown below appears after pressing one of the arming function
keys (STAY, INSTANT, AWAY, MAXIMUM, OFF).
– 20 –
READY
The keypad will remain in the new partition
AAAA
until directed to go back to the original
partition, or until 2 minutes has elapsed with
no keypad activity.
AAAA = alpha descriptor programmed by the
installer
X = partition number
6
+ partition number (0-2).