Table of Contents
Advertisement
AG-188 User Manual
2.8.3
2.8.3
2.8.3
2.8.3
Auto
Auto
Auto
Auto update:
update:
update:
update:
AG-198 gateway support FTP and TFTP auto update. The gateway will auto obtain the
configure file from your update server if configured. To obtain the original configure file,
you can use the FTP/TFTP back up as describe above. Configure file using module
structure, user may remain the concerned modules and remove other modules. Put the
configure file in the root directory of update serve when finish editing.
Current Version: the system will display the current version number 。
�
�
Server Address: FTP/TFTP server address
�
Username: FTP server user name
�
Password: FTP server password
�
Config File Name: The name of configuration file
�
Config Encrypt Key: The encrypt key of confirmation file
�
Protocol Type: The protocol type that used for upgrading
�
Update Interval Time: The interval time that the terminals search for new
configuration file.
�
Update Mode: auto provision mode
�
Disable: not auto update
�
Update after reboot: auto update after reboot
�
Update at time interval: auto update after update interval time
28 / 40
Advertisement
Table of Contents
