Snmp; Backup/Restore - Planet SIP-50 User Manual

♦
Secret Key: The shared secret key with Radius server.
♦
Max Retry: The maximum times of resend request.
♦
Respose Time (sec): The maximum time to wait for a reply from the RADIUS server.
♦
Save: Press save button to save all these configurations.

4.1.8 SNMP

Use the SNMP Configuration screen to display and modify parameters for the Simple Network Management
Protocol (SNMP). The device includes an on-board SNMP agent which monitors the status of its hardware, as
well as the traffic passing through it. A computer attached to the network, called a Network Management
Station (NMS), can be used to access this information. Access rights to the agent are controlled by community
string. To communicate with the device, the NMS must first submit a valid community string for authentication.
♦
Enable SNMP: Check this box to enable the SNMP function.
♦
Community Strings: A community entry authorized for management access. The network
management station must use same string to read the SNMP data from the device.
♦
System Location: Specifies the area or location where the device resides.
♦
Contact Information: Contact person for the device.
♦
Save: Press save button to save all these configurations.

4.1.9 Backup/Restore

You can easily backup and restore the current configuration of SIP Proxy Server.
♦
Backup: Press "Start" button on the Config Download row to download the configuration file of SIP Proxy
Server to your local client side. The following page will then be shown. Click "Save" to save the
configuration file.
SIP-50 SIP Proxy Server User's Manual
- 13 -