Configuration; Preparing For Configuration; Connecting A Pc Or Terminal To The Rs-232 Port; Terminal Emulation Setup Program - Planet NOVASwitch GSW-1200S User Manual

Unlike the unmanaged switch (Dumb switch), GSW-1200S performs
series smart functions that make the switch operate more effectively.
This Chapter will describe the common usage of the Switch Smart

Configuration.

3.1 Preparing for configuration

3.1.1 Connecting a PC or Terminal to the RS-232 Port

When you are ready to configure the smart functions of the switch, make
sure you had connected the supplied RS-232 serial cable to the RS-232
port at the front panel of your GSW-1200S switch and your PC.

3.1.2 Terminal Emulation Setup Program

In Windows 95/98/2000/XP,launch "HyperTerminal", create a new
connection, and adjust settings as below:
§
Emulation: VT-100 compatible
§
Baud per second: 38400
§
Data bits: 8
§
Parity: None
§
Stop bits: 1
§
Flow Control: None
To gain a demo, please see the Figure 3-1.
GSW-1200S User's Manual
3. CONFIGURATION
11