Other Connections; Connecting Auxiliary Devices; Listening To Auxiliary Devices - Pioneer XW-SMA1 Operating Instructions Manual

07

Other connections

Chapter 7:
Other connections
Caution
• Before making or changing the connections, switch off
the power and disconnect the power cord from the
power outlet.
• Open the terminal cover (XW-SMA3 only).
Note
• If the AUX IN mini-plug jack is connected to auxiliary
phones jack, the volume of the unit will be adjusted by
the volume on the playback device. If the sound is
distorted after you lower the volume of the unit, try
lowering the volume on the auxiliary playback device.
• This unit's AUX IN jack is designed for 1 Vms inputs.
Some component CD/DVD players, however, are
designed for 2 Vms output; if one of these components
is connected to the unit, noise may be produced.

Connecting auxiliary devices

Connect the rear panel AUX IN mini-plug jack to your
auxiliary playback device.
DC IN
Note
• If your iPod/iPhone/iPad is not supported by this unit's
iPod/iPhone/iPad jacks (page 29), use the method
noted above to connect your iPod/iPhone/iPad.
34
En
Digital audio player, etc.
Stereo mini-plug cable
(commercially available)
AUX IN
This unit's rear panel

Listening to auxiliary devices

1 Press input to select AUX IN as the input
source.
The input indicator does not light.
2 Start playback of the auxiliary device.
Note
• When using the AUX input, if no cord with mini-plug is
connected to the AUX IN jacks, and this unit is not
operated for 20 minutes or more, the unit's power will
automatically be switched off.