Philips WP3861 User Manual page 7

supervision or instruction concerning use of the water purifier by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with
the water purifier.
Before daily use
- To prevent quick clogging of the filter cartridge, let the water run at
the unfiltered setting for around 5 seconds before every use.
- If the water is highly coloured or turbid due to work on your water
network, do not let the water run at the filtered setting until the
water is clear.
- Cautions:
1 Let the water run at the filtered setting for 10 seconds before use
each day.
2 Let the water run at the filtered setting for 60 seconds before use if
you have not used the water purifier for more than two days.
3 If you are not going to use the water purifier for more than two
weeks, put the filter cartridge in the refrigerator to ensure its good
performance. When you start using the water purifier again, let
the water run at the filtered setting for 1 minute before use. If the
filter cartridge emits an unpleasant smell, replace it with a new one.
Water temperature
- Do not let water hotter than 50°C run through the water purifier at
the unfiltered setting or hotter than 35°C at the filtered setting.
This may damage the water purifier.
- Do not let the water purifier freeze.
Applications
- Only use the water purifier to filter water that meets drinking water
standards.
- Do not use this water purifier in combination with electric taps.
- Do not block the filtered water outlet or connect other devices to it.
- If the water pressure is very high, reduce the water flow of the tap to
prevent damage to the cartridge.
English
7