Related Manuals for Patton electronics 465F
Summary of Contents for Patton electronics 465F
- Page 1 USER MANUAL MODEL 465F and 465MC G.703 Coax to Twisted Pair Adapters (BALUNs) SALES OFFICE Part # 07M465-A (301) 975-1000 Doc. #019141UA Revised 05/01/00 TECHNICAL SUPPORT (301) 975-1007 An ISO-9001 http://www.patton.com Certified Company...
-
Page 2: Service And Support
Thank you for your purchase of this Patton Electronics product. Patton Electronics warrants all Model 465 Series components to This product has been thoroughly inspected and tested and is be free from defects, and will—at our option—repair or replace the warranted for One Year parts and labor. - Page 3 The only user-configurable parameters are the shield connections between the 75 Ohm coax and 120 Ohm interfaces. 1) Both the 465MC and the 465F have a shielded RJ-45 jack. The shields are connected between the modular jack and dual 2) The 465MC has male 1.6/5.6 mm.
-
Page 4: Specifications
PATTON ELECTRONICS 465 SERIES The Model 465 Series requires no AC power or batteries for operation. After making any neccessary configuration changes (see section 3.0), simply SPECIFICATIONS plug in the modular and coax cables as indicated on the case. The pin configuration of the 120 Ohm RJ-45 modular connector appears below: Transmission Line: ITU/CCITT G.703 (unstructured) -
Page 5: Block Diagram
PATTON ELECTRONICS 465 SERIES BLOCK DIAGRAM Coax Shield RJ-45 RJ-45 (pin 3) Jack Shield Shield Tansmit TX Out Data Signal Conversion Twisted Pair Coax (RJ-45) Receive RX In Data Coax Shield RJ-45 (pin 6) Shield © Copyright 2000 Patton Electronics Company All Rights Reserved...