Panasonic TH-103PF10UK Operating Instructions Manual page 39

5
VIEWING AREA / LOCATION
VIEWING AREA: Set a mode of image division for PORTRAIT function.
LOCATION: Set a location of image to be displayed for PORTRAIT function.
LOCATION setting
When PORTRAIT SETUP "ON":
Display the image of the selected location.
VIEWING AREA and LOCATION
The mode of image division and the LOCATION by setting of VIEWING AREA is as follows.
VIEWING AREA: 16:9
LOCATION 1
Undisplayed area (48 dots)
VIEWING AREA: 4:3
LOCATION 1
6
AI-SYNCHRONIZATION
Adjust to equalize the brightness of the 3 displays when using PORTRAIT setting.
Note:
If you set AI-SYNCHRONIZATION to ON, the following menus will be unavailable and these settings will be fi xed to the
initial values.
PICTURE menu: COLOR, TINT
7
Press to select VIEWING AREA or LOCATION.
Press to select each function.
Notes:
• When the input signal is FULL, VIEWING AREA is fi xed to "16:9".
• When "VIEWING AREA" is "16:9", the aspect mode is set to "FULL".
When PORTRAIT SETUP is "OFF":
Represent an area of the selected LOCATION at a normal
brightness and darken the rest of it.
LOCATION 2
LOCATION 2
Press to select AI-SYNCHRONIZATION.
Press to select "OFF" , "ON".
The brightness depends on
each display's setting.
OFF
Press twice to exit from SET UP.
SET UP for PORTRAIT
Suitable to display FULL images. NORMAL
(4:3) images extend transversely.
Both right and left sides of the image are
cut by 48 dots.
LOCATION 3
4:3 images are displayed without changing
aspect ratio.
Although the images of each LOCATION
overlap, you can adjust POS. / SIZE to
display the image normally. (see page 20)
LOCATION 3
Equalize the brightness of
all the displays.
ON
PORTRAIT SETUP
PORTRAIT SETUP OFF
SEAM HIDES VIDEO OFF
VIEWING AREA 16:9
1
LOCATION
AI-SYNCHRONIZATION OFF
PORTRAIT SETUP
PORTRAIT SETUP OFF
OFF
SEAM HIDES VIDEO
VIEWING AREA 16:9
LOCATION 1
AI-SYNCHRONIZATION OFF
39