Panasonic AJ-CA905G Operating Instructions Manual page 8

Attaching the battery pack
BP-90 type battery pack
1
Remove the battery holder.
2
Attach the battery case to the unit.
1 Connect the unit's cable with the cable of the
BP-90 type battery case.
2 Use a screwdriver to attach the BP-90 type
battery case to the unit.
The holes for tightening the screws can be seen
when the cover is opened and the rubber caps
are raised. Use a screwdriver to tighten the
screws, and attach the battery case to the unit.
Ensure that the screws are tightened up as far
as they will go.
<Notes>
O Do not pull the rubber caps with great force.
O Be careful not to catch up the cables when
attaching the battery case.
Connect here.
8 (E)
Battery holder
BP-90 type battery
case
3
Connect the plug of the battery pack to the
connector inside the battery case, and insert the
battery pack into the case.
Label surface
<Note>
Before connecting or disconnecting the plug, turn off
the power of the camera recorder.