Installing Cartridges; Selecting Books - Franklin BOOKMAN ATH-2011 User Manual

Installing Cartridges

Warning: Never install or remove a
BOOKMAN cartridge when your
BOOKMAN is on. If you do, informa-
tion you have entered in the built-in
book as well as in the cartridge will be
erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs of the cartridge
with the notches in the slot.
4. Press the cartridge down
until it snaps into place.
Removing Cartridges
Warning: When you remove a
BOOKMAN cartridge to install an-
other, information that you entered
in the removed cartridge is erased.

Selecting Books

Once you have installed a cartridge
in your BOOKMAN, you can select
which book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
These are sample books.
3. Press or
book you want to use.
4. Press
ENTER
About Screen Illustrations
Some screen illustrations in this
User's Guide may differ from what
you see on screen. This does not
mean that your BOOKMAN is mal-
functioning.
4
.
to highlight the
to select it.