Installing Cartridges And Selecting Books - Franklin BOOKMAN MWS-2018 User Manual

Installing Cartridges
Warning: Never install or remove a
cartridge when BOOKMAN is on. If
you do, information that you entered
in its built-in book, and in an installed
cartridge, will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the car-
tridge with the notches in
the slot.
4. Press the cartridge down
until it snaps into place.
Removing Cartridges
Warning: When you remove a
cartridge to install another, informa-
tion that you entered in the
removed cartridge will be erased.
Selecting Books
Once you have installed a cartridge in
your BOOKMAN, you must select
which book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
These are sample books.
3. Press or
book you want to use.
4. Press
ENTER
Resuming Where You Left Off
You can turn off BOOKMAN at
any screen. When you turn
BOOKMAN on again, the screen
that you last viewed appears.
4
.
to highlight the
to select it.