Table of Contents
Advertisement
3. SCHEDULING
MAIN
SCHEDULE
MON-FRI
E1 TIME
Fig. 76. Schedule - Event 1 Time.
MAIN
3.3.2. E1 TIME
SCHEDULE
MON-FRI
E1 TIME
1. From the selected time period menu, use the
2. Press the
3. Use the
6:00 AM
4. Use the
SET
TIME
5. Press the
FOR
EVENT 1
M24543
3.3.3. E2 SETPOINT
Creating the setpoint for event 2 is accomplished the
same way as the first event. See "3.3.1. E1 SETPT
(setpoint for event 1)" on page 32 above.
3.3.4. E2 TIME
Creating the time for event 2 is accomplished the same
way as the first event. See "3.3.2. E1 TIME (time for event
1)" above.
3.3.5. EXIT
After entering the time for event 2, use the
the schedule time period and return to the Schedule menu
(Fig. 69 on page 30) to select a different time period.
When you finish scheduling the time periods, continue
with "3.4. Exiting Scheduling Mode".
3.4. Exiting Scheduling Mode
Press the HOME button to exit the Schedule menu and
return to the home screen display.
This completes the Scheduling procedure.
33
T775A/B/M SERIES 2000 CONTROLLER
(time for event 1)
buttons to highlight E1 TIME.
button to display the current time set-
ting for event 1.
button to cycle between the hour,
minute, and AM/PM values.
and
buttons to increase/decrease the
desired value for the hour, minute, and AM/PM.
button to accept the time and return to
the selected time period menu.
(setpoint for event 2)
(time for event 2)
(exit from selected time period settings)
and
button to exit
62-0254–03
Advertisement
Table of Contents
Troubleshooting
