Controller Dimensions - Van Air Systems FP-4 Installation, Operation & Maintenance Instructions Manual

T775A/B/M SERIES 2000 CONTROLLER
Temperature Sensors
The controller accepts 1,097 Ohms PTC at 77°F (25°C):
• 50021579-001 – Standard sensor (included with all
models except NEMA 4X models)
• T775-SENS-WR – Water resistant with 5 foot leads
(included with NEMA 4X models)
• T775-SENS-WT – Watertight with 6 foot lead
• T775-SENS-OAT – Outdoor air temperature sensor
• C7031D2003 – 5 inch immersion sensor with wiring
box (use immersion well; P/N 50001774-001)
• C7031J2009 – 12 foot duct averaging sensor with
wiring box
• C7046D1008 – 8 inch duct probe with mounting flange
• C7100D1001 – 12 inch fast response, duct averaging
sensor with flange
• C7130B1009 – Room mount sensor
a
See form 62-0265 – Temperature Sensors for the T775
Series 2000 Stand-alone Controller

Controller Dimensions

LEFT
4 1/16 (103.4)
1/64 (3.8)
4 1/16 (103.4)
2 11/16 (68.1)
7/8 (22.5)
62-0254–03
a
1 (25.5)
7/8 (22.5)
2 15/16 (74)
8 5/32
(207.1)
7 23/32
(196)
7/8 (22.5)
1 (25.5)
Fig. 1. T775A/B/M dimensions in inches (mm).
Accessories
• 107324A – Bulb Holder, duct insertion
• 107408 – Heat Conductive Compound, 4 ounce
• 50001774-001 – Immersion Well, stainless steel 304,
1/2 in. threading
TOP
4 13/32 (112.1)
1/2 (12.4)
3 31/32 (101)
FRONT VIEW
BOTTOM
2
PRODUCT DESCRIPTION
RIGHT
2 13/16 (71.8)
7/8 (22.5)
M24279