Van Air Systems FP-4 Installation, Operation & Maintenance Instructions Manual page 27

2. SETUP (ADVANCED OPTIONS)
Fig. 40. Setup - Sensors - Sensor A - Exit.
SETUP
SETUP
SENSORS SENSORS
# SENSORS
SENSOR A
SENSOR B
EXIT
Fig. 41. Setup - Sensors - Sensor B Menu.
2.2.2.4. Exit Sensor A Setup
SETUP
SENSORS
Press the
SENSOR A
to the Sensors menu.
UNITS
or
CALIBRATE
Use the
LABEL
EXIT
button.
M24506
2.2.3. SENSOR B
For the T775M2030 and T775M2048 models only, which
have a High/Low modulating temperature limit, the LIMIT
SETUP
item displays on the Sensor B menu.
SENSORS
SENSOR B
1. From the Sensors menu, use the
CALIBRATE
LABEL
LIMIT
2. Press the
EXIT
M24507
2.2.3.1. CALIBRATE
Setting the calibration value is accomplished the same
way as the Sensor A. See "2.2.2.2. CALIBRATE (the
sensor)" on page 18 above.
2.2.3.2. LABEL
Setting the label is accomplished the same way as the
Sensor A. See "2.2.2.3. LABEL (the sensor input)" on
page 18 above.
19
T775A/B/M SERIES 2000 CONTROLLER
button to exit Sensor A selections and return
and buttons to highlight EXIT and press the
light SENSOR B.
button to display the Sensor B menu.
button to high-
62-0254–03