Overriding A Ucm Or Application - Trane TRACER SUMMIT BMTX-SVU01B-EN Daily Operations

Displaying and Changing Status Information
70

Overriding a UCM or Application

1. Open the Simplified Override dialog as described in "Accessing the
Simplified Override Dialog box" on page 60. The override dialog box
displays (see Figure 61).
Note:
If you are overriding an application object it must have a
Present Value property. Area is an example of an application
with a Present Value property.
Figure 61. UCM Override Dialog Box
Note:
Click on the More control button at the bottom of the dialog box
to display the Priority Arrays box. To perform an override, your
default control priority level must be higher than priority level
listed in the box. If not, refer to "Using the Advanced Systems
Override" on page 72.
2. Click on the Manual option in the Auto/Manual knob.
3. Click and drag the indicator in the slider bar to the desired setting.
4. Click the Apply button to apply the override and view the results, or
click OK to apply the changes and close the dialog box.
BMTX-SVU01B-EN