Domain Filtering - TP-Link TL-R860 User Manual

4.7.3

Domain Filtering

The Domain Filtering page (shown in Figure 4-27) allows you to control access to certain
websites on the Internet by specifying their domains or key words.
Before adding a Domain Filtering entry, you must ensure that Enable Firewall and
Enable Domain Filtering have been selected on the Firewall page. To Add a Domain
filtering entry, click the Add New... button. The page " Add or Modify a Domain
Filtering entry " will appear, shown in Figure 4-28:
Figure 4-28 Add or Modify a Domain Filtering entry
To add or modify a Domain Filtering entry, follow these instructions:
1. Effective Time - Enter a range of time in HHMM format, which point to the range
time for the entry to take effect. For example, 0803 - 1705, the entry will take effect
from 08:03 to 17:05.
2. Domain Name - Type the domain or key word as desired in the field. A blank in the
domain field
www.xxyy.com.cn, .net.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to save this entry.
To add additional entries, repeat steps 1-4.
When finished, click the Return button to return to the Domain filtering page.
To Modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Edit column.
TL-R860
Figure 4-27 Domain Filtering
means all websites
- 31 -
Cable/DSL Router User Guide
on the Internet. For example: