The Labelmanager Window - Dymo LabelMANAGER User Manual

Getting Started

The LabelMANAGER Window

The LabelMANAGER software is easy to learn because the main window consists of menus and
toolbars similar to those of popular word processing programs.
This section summarizes the commands available to you. For more detailed information about a
particular command, refer to the Help.
To start LabelMANAGER
File Menu
The following commands are available from the File menu.
Toolbar
2
If you choose to register over the Internet, wait a few seconds while your information is
transmitted to DYMO.
To register by mail or fax, click Print to print the completed registration form, and mail or fax
the form to the location printed on the form.
Select Start > Programs > LabelMANAGER > LabelMANAGER.
The LabelMANAGER main window is displayed.
Standard Toolbar
Formatting Toolbar
Tape Settings Toolbar
Rulers
Text Area
Menu
Icon Command
New
Open
Save
Save As
Merge Print
from Database
Printer Setup
Print
Change Printer
Exit
Description
Clears the label text. If the label has been modified, prompts you to save the
changes.
Displays the Open File dialog box to open a saved label file. If the current
label has been modified and not saved, prompts you to save the changes.
Saves the current label to disk.
Allows you to name the label prior to saving.
Allows you to print labels directly from a .txt or .csv file.
Displays the Printer Setup dialog box allowing access to the driver
properties.
Prints the current label. The menu command displays a dialog box asking
how many copies to print.
Allows you to choose your printer if more than one LabelMANAGER
printer is installed.
Exits the program. If the current label has not been saved, prompts you to
save the changes.