Introduction - Draytek VigorIPPBX 3510 Series Quick Start Manual

1 . I n t r o d u c t i o n
1 . I n t r o d u c t i o n
nd
The VigorIPPBX 3510 is a dual-WAN broadband router with IP PBX function. The 2
th
WAN interface is shared with the 4 LAN port. These two WANs can connect to
DSL/Cable modem or fiber media converter for policy-based load-balance, fail-over and
BoD (Bandwidth on Demand); it also features advanced bandwidth control mechanism
such as IP-layer QoS, NAT Session Limitation, Bandwidth Borrowed, etc., to allow easy,
flexible, reliable access control and bandwidth management.
VigorIPPBX 3510 is an IPPBX device which must connect to a router by WAN port for
accessing into Internet.
The SPI (Stateful Packet Inspection) firewall on VigorIPPBX 3510 uses object-based
design to make settings of firewall policies easy. The CSM (Content Security
Management) feature allows more precise and efficient access control for URL/Web
Content Filtering, IM (Instant Messenger) and P2P (Peer to Peer) applications.
With hardware-based implementation of the VPN protocols, the VigorIPPBX 3510
supports up to 32 VPN tunnels using advanced protocols such as IPSec/PPTP/L2TP with
AES/DES/3DES for encryption and MD5/SHA-1 for authentication.
VigorIPPBX 3510 can provide up to 100 extensions setup to let all IP phones register to
LAN or remote sites around the world to have unlimited free calls through Internet.
Moreover, VigorIPPBX 3510 is able to establish multiple networking architectures
corresponding to your current desire and future needs of growing communication. Its
PSTN compatibility lets you move from simple VoIP solution such as IP phone and
Softphone to integrate with comprehensive networking infrastructure, such as Analog
phone line any time you need.
VigorIPPBX 3510 Quick Start Guide
1