Center Lap Belts; Automatic Locking Retractor (Alr) Mode - If Equipped - Dodge Ram Truck Owner's Manual

2010
Hide thumbs Also See for Ram Truck:
Table of Contents

Advertisement

you will prefer a higher position. When you release the
anchorage, try to move it up or down to make sure that
it is locked in position.

Center Lap Belts

The center seating position for the Quad Cab , Mega
Cab and Crew Cab front seat has a lap belt only. To
fasten the lap belt, slide the latch plate into the buckle
until you hear a click. To lengthen the lap belt, tilt the
latch plate and pull. To remove slack, pull the loose end
of the webbing. Wear the lap belt snug against the hips.
Sit back and erect in the seat, then adjust the belt as
tightly as is comfortable.
WARNING!
• A lap belt worn too loose or too high is dangerous.
• A belt worn too loose can allow you to slip down
and under the belt in a collision.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47
• A belt that is too loose or too high will apply crash
forces to the abdomen, not to the stronger hip
bones. In either case, the risk of internal injuries is
greater. Wear a lap belt low and snug.
Automatic Locking Retractor (ALR) Mode – If
Equipped
In this mode, the shoulder belt is automatically pre-
locked. The belt will still retract to remove any slack in
the shoulder belt.
When To Use The Automatic Locking Mode
Use the Automatic Locking Mode any time a child safety
seat is installed in a passenger seating position. Children
12 years old and younger should be properly restrained
in the rear seat whenever possible.
(Continued)
WARNING! (Continued)
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ram truck 2010

Table of Contents