Table of Contents
Advertisement
To start, you must first install the 4-AAA batter-
ies in the back of the unit by sliding off the bat-
tery cover in the direction of the arrow. Place
the batteries in the unit following the diagram
inside the case. Then, replace the cover.
Here is how to set the message language, ad-
just the contrast, and disable the demonstration.
1. Press ON/OFF.
2. Press A or B to choose a message
language.
A brief demonstration appears.
3. Press LÖSCHEN to stop the demonstra-
tion at any time.
4. Repeatedly press
screen contrast.
Note: You can adjust the screen contrast
only at an empty entry screen.
Disabling the Demonstration
To disable the demonstration, press
LÖSCHEN and then MENÜ. Next, press
repeatedly to highlight Disable Demo .
Press EINGABE to disable it. To enable
the demo, repeat these steps.
Getting Started
or
13
to adjust the
Advertisement
Table of Contents
