Advertisement
Quick Links
TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
Compact Entry Phones Available in Five Attractive Finishes
"Brushed Stainless Steel"
(similar to brushed nickel) Shown with
optional VE-3x5 box (not included)
The E-40 Series entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to
provide two-way handsfree communication. The E-40's compact size allows it to be mounted in a standard single gang electri-
cal box. The E-40 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement
E-40 faceplates (PNL40) can be purchased separately and are available in all five standard finishes. The E-40's blue LED con-
tinually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming ring.
Note: LED not available on all models. Contact Viking for more information. The E-40 entry phones can share a single phone
line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller.
The E-40 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system
or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer. The E-40 features
microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for auto-
matic hang-up when the call is completed. For outdoor installations where the unit is exposed to precipitation or condensation,
the E-40 Series is available with Enhanced Weather Protection (EWP). For more information on EWP, see DOD# 859.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• Compact size: Front panel is the size of a typical single gang mid-
size wall plate
• Mounting: Flush mounts in a single gang electrical box (2.25"
deep x 2.00" wide x 2.84" tall minimum) or surface mounts in a Viking
model VE-3x5 (not included, see DOD# 424)
• Available in 5 standard faceplate finishes: Brushed Stainless Steel,
Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
• PNL-40 faceplates: Replacement faceplates with matching screws
available in all five standard finishes
• Vandal Resistant Features: 16 gauge polished brass or 18 gauge
304 stainless steel faceplate, 316 stainless steel push button, carbon
fiber reinforced plastic speaker screen, scratch resistant powder
coating, hex drive mounting screws
• Weather Resistant Features: Mylar speaker, faceplate gasket,
mic and speaker gasket, internally sealed (IP67) push button
switch, self draining mic mount and UV stable weather resistant
powder coating (excluding E-40-SS 304 Stainless Steel faceplate)
• E-40-EWP is designed to meet IP66 Ingress Protection Rating
(see DOD# 859 for more information)
• Telephone line powered
• Microphone and speaker volume controls
• Programmable Intelligent call progress detection for automatic
hang-up on CPC, silence, busy signal, or time out
• Selectable auto answer feature for monitoring
• Programmable VOX (mic/speaker) switching speed
• Blue LED helps locate push button, indicate ringing and off hook
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
E-40-SS
E-40-BN
"Oil Rubbed Bronze"
(satin dark brown powder
paint with fine copper metallic)
P
r
a
c
P
r
a
c
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
E-40-PB
"Polished Brass"
(with clear gloss powder
paint to prevent tarnishing)
A
p
p
l
i
A
p
p
l
• Door or gate communication, business delivery entrances
• Use with a Viking C-200 or C-250 to control an E-40 on a single line
• Use with a Viking C-2000B to control 1 to 4 E-40's and door/gate
control on a single phone line
• Provide unique front and back door chimes and paging when used
with a Viking SLP-1, SLP-4 and C-2000B
• Residential, commercial and industrial door security
• Use with a Viking K-1900-5 or K-1900-30 for automatic speed
dialing on telephone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable ringdown
capability
S
p
e
c
S
p
e
c
Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum
loop current of 20mA. Loop current may be boosted on low current lines with a Viking
model TBB-1B Talk Battery Booster (see DOD# 632).
Dimensions: Faceplate: 123.8mm x 79.4mm x 4.6mm (4.875" x 3.125" x 0.18"), Phone:
72mm x 46mm x 42mm (2.84" x 1.8" x 1.65")
Shipping Weight: 0.45 kg (1.0 lbs)
Operating Temperature: -34° C to 65° C (-30° F to 150° F)
Humidity: Standard model: 5% to 95% non-condensing humidity, EWP model: up to
100% humidity
Speaker Volume: Approximately 62db maximum @ 1m
Ring Voltage: 25V AC RMS minimum (for auto answer)
CPC Disconnect Time: 300ms minimum
REN: 0.8A
Connections: (2) gel-filled butt connectors
E-40 Series
E-40 Series
Compact Single Gang
t
i
c
e
t
i
c
e
Entry Phones with LED
November 4, 2011
E
N
T
U
R
Y
E
N
T
U
R
Y
E-40-WH
"Satin White"
(satin white powder paint)
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
E-40-BK
"Satin Black"
(fine texture satin black
powder paint)
Advertisement
Related Manuals for Viking E-40-BK
Summary of Contents for Viking E-40-BK
- Page 1 Note: LED not available on all models. Contact Viking for more information. The E-40 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller.
-
Page 2: Limited Warranty
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the... - Page 3 C. Surface Mounting A Viking model VE-3x5 can be used to surface mount an E-40 to a wall or post. Drill a small wire exit hole in wall. Pull wire through and seal hole around wire with putty or caulking. Route wire into the VE-3x5 box, securely screw it to wall or post and seal hole in box around wire with putty or caulking.
- Page 4 1 ON), the E-40 will also answer any incoming call. Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no respon- sibility for errors and omissions contained in this information.