03 Your driving environment
Key positions
Insert and remove the remote control
key
03
Ignition switch with inserted remote control key.
NOTE
For cars with keyless function*, see
page 53.
Insert the key
Hold the end of the remote control key with the
detachable key blade and insert the key in the
ignition switch. After a gentle press on the key
it is drawn into the lock.
*
74
Option/accessory, for more information, see Introduction.
IMPORTANT
Foreign objects in the ignition switch may
jeopardise the function or destroy the lock.
Do not press the remote control key incor-
rectly turned - Hold the end with the detach-
able key blade, see page 47.
Withdraw the key
The remote control key is ejected after a gentle
press on it. (Automatic gearbox* must be in
position P.)
Functions
The remote control key's 3 different key posi-
tions can be reached without the need to start
the engine. The table shows the functions
available in each key position.
NOTE
To reach key position I or II without starting
the engine - do not depress the brake/
clutch pedal when the following operations
are carried out.
Key position 0
Insert the remote control key in the ignition
switch and gently press it - The key is drawn
into the lock.
Key position I
With the remote control key inserted into the
ignition switch - Briefly press on START/STOP
ENGINE.
Key position II
With the remote control key inserted into the
ignition switch - Press on START/STOP
ENGINE for about 2 seconds.
Back to key position 0
To return to key position 0 from position I or II
- Briefly press on START/STOP ENGINE.