Volvo V70 Owner's Manual page 264

07 Maintenance and service
Lamps
Installing the headlamp
1. Plug in the connector. A clicking sound
should be heard.
2. Reinstall the headlamp and locking pins.
Check that they are correctly inserted.
3. Check the lighting.
The headlamp must be mounted and the con-
nector correctly installed before the lighting is
switched on or the remote control key is
inserted into the ignition switch.
Removing the cover
07
Before starting to replace a bulb, see
page 263.
1. Open the lock clamp by pressing up/out.
264
2. Press down the clips on the cover and
remove it.
Reinstall the cover in reverse order.
Dipped beam, halogen
1. Detach the headlamp, see page 263.
2. Remove the cover.
3. Unplug the connector from the bulb.
4. Detach the bulb by pressing the holder
downwards.
5. Detach the bulb by pulling it straight out.
6. Fit the new bulb in the socket and snap it
in. It can be secured in one position.
Reinstall the parts in reverse order.
Main beam, Halogen
1. Detach the headlamp.
2. Remove the cover.
3. Detach the bulb by turning anticlockwise
and then pulling straight out
4. Unplug the connector from the bulb.
5. Replace the bulb and align it in the socket
and turn clockwise in order to secure it. It
can be secured in one position.
Reinstall the parts in reverse order.