Volvo V70 Owner's Manual page 159

•
Ensemble - Shows channel groups that
the receiver has obtained via channel
group programming.
•
Service - Shows channels irrespective of
the channel group to which they are allo-
cated. The list can also be filtered using
DAB PTY
(see below).
•
Subchannel - Subchannels to a selected
channel.
The lists can be accessed via the menu. The
channel groups can also be accessed by
pressing ENTER.
Scanning
Scanning means that all channels in the list are
played for 10 seconds each.
±
Press SCAN to activate
Scanning can also be selected in DAB-PTY
mode. In which case only channels of the pre-
selected programme type are played.
±
Stop scanning by pressing SCAN once, or
by pressing EXIT.
Subchannel
Secondary components are usually named
subchannels. These are temporary and can
contain e.g. translations of the main pro-
gramme into other languages.
If one or more subchannels are broadcast then
>
the symbol is shown to the right of the chan-
nel name in the display. A subchannel is indi-
>
cated by the symbol appearing to the left of
the channel name in the display.
To access a subchannel:
±
Press .
To navigate between subchannels:
±
Press or .
Subchannels can only be accessed on the
selected main channel and not on any other
one without selecting it.
DAB PTY (program type)
DAB PTY selects one type of radio pro-
gramme. There are 29 different programme
types which also include different programme
categories. After selecting a programme type,
navigation only takes place within the channels
broadcasting that type.
Exit this mode as follows:
±
Press EXIT
It is also possible to select a preset channel or
DAB PTY
exit via the menu. In certain cases
DAB radio will exit PTY mode when DAB to
DAB linking (see below) is implemented.
04 Comfort and driving pleasure
DAB to DAB link
It is possible to exit a channel with poor or no
reception to the same channel in another chan-
nel group with better reception. There may be
a certain delay when changing channel group.
There may be a period of silence between the
current channel no longer being available to the
new channel becoming available.
DAB display settings
1. Basic - Only the channel name is shown if
a primary component is being played. A
subchannel name is shown if it is a sub-
channel being played
2.
Ensemble
to the channel name
3. Ensemble
type name under the channel name
Preset
10 station presets can be stored per wave-
length. DAB has 2 memories for presets:
DAB1 and DAB2
selected using the preset buttons.
A preset contains one channel but no sub-
channels. If a subchannel is being played and
a preset is saved then only the channel ID is
registered. This is because subchannels are
temporary. At the next attempt to retrieve the
preset, the channel which contained the sub-
Audio system
- Adds the channel group name
PTY
+ - Adds the programme
. The stored presets are
04
``
159