Volvo S40 Operation Manual page 43

2000 Volvo S & V 40
Set button C
Sets speed warning.
Turn the knob to the required setting. Press button C briefly and repeatedly to set the speed limit.
Speed warning signal
If the current speed exceeds the preset speed the buzzer will sound immediately and then once every 10
seconds. If you set the speed
below the current speed, the buzzer will sound after 10 seconds and then once
every 10seconds as long as the current speed is below the preset speed."
If the speed warning function is not selected, the display will flash the preset speed.
Set
The speed warning can be set by pressing set button C briefly, in steps of 5 mph (8 km/h) from 19 mph
up to 88 mph (30 km/hr up to 140 km/h).
If the speed warning function is set, the triangle
Temporary disable
The function can be disabled temporarily by pressing reset button B briefly.
The triangle will disappear. The set speed will stay in the memory.
Pressing set button C briefly will enable the speed warning function, irrespective of the selected
function.
Automatic disable
The function can be disabled temporarily when ignition is switched off. The set speed will remain in the
memory.
Switch off
file:///K|/ownersdocs/2000/2000_SV40/00sv40_02b.htm (5 of 12)12/30/2006 3:42:17 PM
will be displayed in the Trip Computer.