Trip Computer Controls - Volvo 850 Owner's Manual

1996 Volvo 850

Trip computer controls

Select one of the trip computer's six functions by using control B. The Reset button (C) is used to reset
the following functions:
Average speed
Average fuel consumption
Trip meter
Rotate the control to the required position and press the button for at least two seconds to reset the
selected function.
NOTE: If pressure is maintained on the button for another three seconds, all three of the functions
mentioned above will be reset.
pg. 1:13 Trip computer (certain models)
Average speed Ø mph (Canada: km/h)
Average speed since the function was last reset. When the ignition is switched off, the average speed is
stored in memory and is used as the basis for the new figure when the engine is started again. It can be
reset by pressing the reset button on the trip computer control.
file:///K|/ownersdocs/1996/1996_850/96850_111.htm (3 of 5)12/30/2006 9:58:59 AM