Trip Computer - Volvo V60 TWIN ENGINE 2019 Owner's Manual

DISPLAYS AND VOICE CONTROL
|| Symbols in the hybrid battery gauge
The symbol in the hybrid battery gauge indi-
cates that the Hold function is activated, and the
symbol indicates that the
is activated.
Related information
Driver display (p. 77)
•
Charging the hybrid battery (p. 405)
•
Hold and Charge function (p. 458)
•
The figure is schematic - parts may vary depending on car model.
1
82

Trip computer

The car's trip computer records vales such as
e.g. distance, fuel consumption and average
speed whilst driving.
In order to facilitate fuel-efficient driving, informa-
tion is recorded about both instantaneous and
average fuel consumption. The information from
the trip computer can be shown in the driver dis-
play.
Charge function
Examples of trip computer information in the driver dis-
1
play.
The following meters are included in the trip
computer:
Trip meter
•
Odometer
•
Instantaneous fuel consumption
•
Distance to empty tank
•
Distance to empty battery
•
Tourist - alternative speedometer
•
Units for distance, speed, etc. can be changed via
system settings in the centre display.
Trip meter
There are two trip meters, TM and TA.
TM can be reset manually and TA is reset auto-
matically if the car is not used for at least four
hours.
The following information is registered while driv-
ing:
Mileage
•
Driving time
•
Average speed
•
Average fuel consumption
•
The values apply from the trip meter's latest
reset.
Odometer
The odometer records the car's total mileage.
This value cannot be reset to zero.
Instantaneous fuel consumption
This gauge shows the fuel consumption that the
car has at the moment. The value is updated
approximately every second.