Advertisement
P
r
o
g
r
a
m
m
P
r
o
g
r
a
m
m
A. Accessing the Programming Mode
The LC-6 can be programmed locally or remotely through a telephone line from any touch tone phone.
1. Locally Using the Security Code
Step 1. Come off hook with a touch tone phone connected to the Fire Floor, Machine Room or Lobby phone, and wait for
the beep.
Q
Step 2. Enter "
beep should then be heard indicating you have entered the programming mode.
Step 3. When finished programming, hang up.
2. Locally Without the Security Code
Step 1. Move DIP switch 3 to the ON position (Learn Mode, see Programming section J).
Step 2. Come off hook with a touch tone phone connected to the Fire Floor, Machine Room or Lobby phone. A double
beep will be heard indicating you have automatically entered the programming mode.
Step 3. When finished programming hang up and move DIP switch 3 back to the OFF position (Normal Operation Mode,
see Programming section J).
Warning: Failure to do step 3 above will cause the LC-6 to be stuck in the Learn Mode leaving many operational features
not functional.
3. Remotely Using the Security Code
Step 1. From a touch tone phone call the telephone line attached to the LC-6.
Step 2. When the LC-6 answers, wait for the beep, then enter "
845464, see Programming section B). A double beep should then be heard indicating you have entered the
programming mode.
Step 3. When finished programming, hang up.
4. Remotely Without the Security Code
Step 1. Move DIP switch 3 to the ON position (Learn Mode, see Programming section J).
Step 2. From a touch tone phone call the telephone line attached to the LC-6.
Step 3. When the LC-6 answers, a double beep will be heard indicating you have automatically entered the programming
mode.
Step 4. When finished programming hang up and move DIP switch 3 back to the OFF position (Normal Operation Mode,
see Programming section J).
Warning: Failure to do step 4 above will cause the LC-6 to be stuck in the Learn Mode leaving many operational features
not functional.
B. Security Code
The security code allows the user/installer to program the LC-6 while DIP switch 3 is in the OFF (normal operation)
position. The factory set security code is 845464 (V-I-K-I-N-G). It is recommended that the factory set security code be
changed to your own 6 digit number. Example: To store 123456 as the security code:
Step 1. Access programming as shown in Programming section A.
Step 2. Enter 123456 #47.
Step 3. Hang-up.
Note: The security code must be 6 digits and cannot include a Q or a #.
4
i
n
g
i
n
g
" followed by the 6-digit security code (factory set to 845464, see Programming section B). A double
Q
" followed by the 6-digit security code (factory set to
Enter Your Security Code Here:
#47
Advertisement
