About The Daily Alarms; Automatic Snooze Function - La Crosse Technology WT-8005U Manual

•
To set the Alarm Time, press and hold down
the ALARM button for 2 seconds until the hours
digits flash. Use the "▲" and "▼"buttons to set
the required hour. Press ALARM button to
confirm your setting
•
The Minute display of the Alarm time starts to
flash. Use the "▲" and "▼"buttons to set the
required minute. Press ALARM button to
confirm your setting and to end the setting
procedure.
•
To activate or deactivate the daily alarms,
briefly press the "ALARM" button once. When
the alarm is active the clock displays the " "
icon after the hour. When deactivated the
alarm icon does not show.

About the Daily Alarms:

•
After 30 seconds without pressing any button
the clock switches automatically from setting
mode to Normal clock mode.
•
The alarm will sound for 2 minutes if you do not
deactivate it by pressing any button. In this
case the alarm will be repeated automatically
after 24 hours.
•
Rising alarm sound changes the frequency 4
times while the alarm signal is heard. This is
known as a "Crescendo Alarm".

Automatic Snooze function:

•
While the alarm is sounding, press the
SNOOZE button to activate the snooze
function. The " " icon appears on the display.
•
This operation moves the alarm back by 5
minutes and the alarm will restart at this time.
•
The Snooze function can be interrupted by
pressing any button.
Page 6 of 12