La Crosse Technology WT-8005U-B, WT-8005U-B-INT Manual

POWER UP

1. Insert 2-AA batteries into your Digital Clock.
2. After Power Up, your clock will search for the Atomic Time Signal for 7 minutes. Buttons will not function during the search. When Atomic Time Signal is received, the clock will set itself to the Pacific time zone (default). Press the ZONE button to select your time zone.
   OR
3. Press the SEARCH button to stop the initial Atomic Time Search and set the time manually.
   • The clock will search for the Atomic Time Signal again after midnight.
   • PressSEARCH button anytime, to start an Atomic Signal Search.

For more information on Atomic Time visit: bit.ly/atomic_time

SETTINGS MENU

1. Hold the SET button until the display changes to enter the Settings Menu. Press and release the + or - buttons to adjust values. Hold to adjust quickly.
2. Press and release the SET button to confirm values and move to the next setting.
3. Press and release the SNOOZE button at any time to exit.

Settings Menu Order:

• 12/24 Hour
• Hour
• Minutes
• Year
• Month
• Date
• DST on/oF (ON/OFF)

Weekday: Your weekday display will adjust automatically once you have your Year, Month, and Date settings set correctly.

TIME ZONE SELECTION

Press and release the ZONE button to select from four North American Time Zones:
P = Pacific • M = Mountain • C = Central • E = Eastern

FAHRENHEIT / CELSIUS

Press and release the ºF/ºC button to select Fahrenheit or Celsius temperature display.

TIME ALARM

Set Alarm Time:

1. Hold the ALARM button to enter the Alarm Settings Menu. The Seconds will be replaced by the letters "AL".
2. The Alarm Hour will flash. Use the +/- buttons to adjust values. Press the ALARM button to confirm and move to the minutes.
3. The Alarm Minutes will flash. Use the +/- buttons to adjust values. Press the ALARM button to confirm and exit.

Activate/Deactivate Alarm:
Setting the alarm time and activating the alarm are separate steps.

1. Press the ALARM button to view the alarm time.
2. Press and release the + (PLUS) button to activate or deactivate the Time Alarm.
3. The Alarm Icon will appear when active and will disappear when inactive.

Snooze:

• When the alarm sounds, press theSNOOZE button to silence the alarm for 5 minutes.
• Press any button (except SNOOZE) to silence the alarm for 24 hours.

RESET BUTTON

• If the Digital Clock display appears distorted or is not responding to buttons, use a pen or paper clip to press theRESET button one time.
• This will reset the atomic clock to default settings.

We're Here to Help
If you require additional assistance, get in touch with our friendly customer support team based in La Crosse, WI.
Self Help:bit.ly/wt-8005u-b_support
Online: bit.ly/contact_techsupport
Phone: 1.608.782.1610
Our knowledgable customer support team is available: Mon-Fri 8am-6pm CST

SCAN HERE Additional Info and Support

Stay in Touch!
Ask questions, watch set up videos, and provide feedback on our social media outlets. Follow La Crosse Technology on Youtube, Facebook, Instagram, and X (Twitter).

This product can expose you to chemicals including acrylonitrile, 1, 3-butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov

SPECIFICATIONS

Atomic Clock: WT-8005U-S

• Temperature Range: 32°F to 122°F (0°C to 50°C)
• Update Interval: About every 51 seconds
• Power: 2-AA, IEC, LR6 batteries (not included)
• Battery Life: 24+ months
• Dimensions: 8.9" L x 1.2" W x 7.2" H (22.60 L x 3.04W x 18.2 H cm)

CARE & MAINTENANCE

Battery Replacement Instructions
When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.

• Always purchase the correct size and grade of battery most suitable for the intended use.
• Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone directory for local recycling centers and/or follow local government regulations.