Vertu Signature NPM-7 User Manual page 52

If the clock is set to the 12-hour format, the following
screen also appears:
On the stand-by display, an indicator icon
beneath the battery and signal indicators to show that the
alarm has been set.
If you set the alarm clock and then switch off your
Vertu phone, the alarm will still sound at the time set,
provided your battery is adequately charged. This
can be particularly useful when you want to use the
alarm clock function but do not want to receive calls.
At the specified time, an audible alert sounds and the
alarm time and display lights flash.
To pause the alarm when it sounds:
Scroll to am or pm .
>
Press . A confirmation
ok
>
message appears.
appears
either
Press snooze . After five
>
minutes the alarm sounds
again.
or
Press any other key except
>
or the key. After
stop
E N D
one minute the alarm
sounds again.
If your Vertu phone was on
when the alarm sounded, a
confirmation message
appears.
If your Vertu phone was off
when the alarm sounded, the
phone remains switched off.
To switch off the alarm when
it sounds:
Press .
stop
>
0 3 T H E M E N U S
V E R T U
To unset the alarm at any time:
The alarm will sound even if you have switched off
warning tones.
If your Vertu phone was off
when the alarm sounded, you
can choose whether to
switch the phone on or keep
it off.
Press to switch the
yes
>
phone on. Do not press
when wireless phone
yes
use may cause
interference or danger.
or
Press to keep the
no
>
phone switched off.
From the stand-by display,
>
press .
menu
Scroll to settings .
>
Press .
select alarm clock
>
appears.
Press .
select
>
Scroll to .
off
>
Press . A confirmation
ok
>
message appears.
3-23