Security; Auto Screenlock; Setpoint Limits - Venstar ColorTouch T6800 Owner's Manual And Installation Instructions

The Main Menu Buttons
Security settings may be set to limit or
prevent changes to your thermostat.

Security

Auto Screenlock

Auto Screenlock - OFF
Auto Screenlock - ON
Set Passcode
Use keypad to enter and confirm passcode.
When the thermostat
is locked, the bottom
bar of the display will
show:
Press UNLOCK then enter passcode to access thermostat settings.
Lock After...
Set the t ime the screen will automatically lock after the last button press.
Allow mode changes - OFF
Choose to allow mode changes when Auto Screenlock is on.
Allow setpoint changes - OFF
Choose to allow setpoint changes when Auto Screenlock is on.
Allow override - OFF
Choose to allow use of the Override button when Auto Screenlock is on.

Setpoint Limits

Limits how high or low heating and cooling may be adjusted.
Page 27
Security
NOTE: Code must be set before
Auto Screenlock can be
turned on.
(code not set )
(5 m)