Spare Tire & Tools; Tire Pressure Monitoring (Warning) System - Toyota SIENNA 2010 Quick Reference Manual

SAFETY AND EMERGENCY FEATURES
Seatbelts
If belt is fully extended, then retracted even slightly, it cannot be
re-extended beyond that point, unless fully retracted again. This feature
is used to help hold child restraint systems securely.
To find more information about seatbelts, and how to install a child
restraint system, refer to the Owner's Manual.
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or
replaced, turn the ignition switch to "ON" and press and hold the
" SET" button until indicator blinks three times. Let the vehicle sit for a
few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner's Manual for tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local Toyota dealer.
Note: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently, setting the tire pressures to factory
specifications should turn off the light.
Take up slack
Too high
Keep as low on
hips as possible
28
Spare tire & tools
All-wheel drive models are equipped with run-flat tires. Refer to the
Owner's Manual for more detail.
Tool and spare tire location
Two-wheel drive models
Four-wheel drive models
Removing the spare tire
Two-wheel drive models
Spare tire clamp bolt
Four-wheel drive models
(1)
(2)
Refer to the Owner's Manual for jack positioning and tire changing
procedures.
Tire bag
Jack handle
Wheel nut wrench
Jack
Adapter
Spare tire
Turn
Socket adapter
(1) Remove the lid.
(2) Loosen and remove the bolt.
29