External Monitor - Toshiba Satellite M40 User Manual

User's Manual
10. Set the Parallel Port Mode and press OK.
11. Choose Reboot for the change to take effect.
12. Select the printer in Windows Add Print Wizard. To access the Add Print
Wizard utility, click Start, point to Settings, click Printers and double
click the Add Printer icon.

External monitor

An external analog monitor can be connected to the external monitor port on the
computer, Port Replicator. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
CAUTION: If an external monitor is connected to the computer, do
not connect the Port Replicator. First disconnect the external moni-
tor from the computer then connect the Port Replicator and use its
external monitor port.
Note: The Resume feature can be used with an external monitor.
Simply enable Resume and the computer will maintain the data as it
is displayed on the external monitor.
1. Connect the monitor to the external monitor port.
2. Turn the monitor's power on.
When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.
You can use the HW Setup to select between Auto-Selected and Simultaneous
displays. Refer to Chapter 7,
If you have selected Simultaneous under the Display options of the HW Setup,
both the external monitor and the internal LCD will be active when you turn on
the computer. If Auto-Selected is selected, only the external monitor will be
active.
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the inter-
nal display. Refer to Chapter 5,
change the display setting.
Note: If you set Simultaneous for the computer's display, you
must set the computer's display resolution to the same as that of the
external monitor or other device, such as a projector.
8-12
HW Setup and Passwords.
The Keyboard, for details on using hotkeys to