Properties Menu - Toshiba Satellite P200 Series User Manual

Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the Country/
Region in the Control Panel, the change may not take effect.
2. The Region Selection icon appears on the Windows Task Bar.
3. Click the icon with the primary mouse button to display a list of regions
that the modem supports. A sub menu for telephony location information
will also be displayed. A check will appear next to the currently selected
region and telephony location.
4. Select a region from the region menu or a telephony location from the
submenu.

Properties menu

Click the icon with the secondary mouse button to display the following
menu.
Settings
You can enable or disable the following settings:
AutoRun Mode
Region Select Utility starts automatically when you start up the operating
system.
Open the Dialling Properties dialogue box after selecting
region.
The dialling properties dialogue box will be displayed automatically after you
select the region.
4-14
The Region Selection icon
When you click a region it becomes the modem's region selection,
and the New Location for telephony will be set automatically.
When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem's current region
setting.
The properties menu
Satellite P200/Satellite Pro P200
Operating Basics