Power-Up Modes; Panel Power Off/On; System Automatic Sleep/Hibernation - Toshiba Satellite P200 Series User Manual

To enter a password manually, follow these steps:
1. Turn on the power as described in Chapter 3, Getting Started. The
following message will appear in the LCD:
Enter Password [xxxxxxxx]
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.
2. Enter the Password.
3. Press Enter.
If you enter the password incorrectly three consecutive times, the computer
shuts down. You must turn on the computer again and re-enter the
password.

Power-up modes

The computer has three power-up modes:
Hibernation (saves data in memory to the hard disk)
Sleep (power remains on, maintaining the data in memory, but the CPU
and all other devices effectively enter a 'sleep' mode)
Boot (does not save data in memory)
Refer also to the section Turning off the power in Chapter 3, Getting Started.

Panel power off/on

This feature makes the computer to enter Hibernation when the display
panel is closed and turns it back on when the display panel is opened.
If the panel power off function is enabled and you use Shut down Windows,
do not close the display until the shut down function is completed.

System automatic Sleep/Hibernation

This feature automatically turns off the system in Sleep or Hibernation mode
if the computer is not used for a set duration.
Refer to Special features, in Chapter 1, Satellite P200/Satellite Pro P200
Series Features for an explanation of how to set the duration.
7-14
Power and Power-Up Modes
Satellite P200/Satellite Pro P200