Toshiba Satellite P200 Series User Manual page 127

Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM
writing. Writing is finished if you can eject DVD-RAM media.
Be sure to close all other software programs except the writing software.
Do not run software such as a screen saver, which can put a heavy load
on the CPU.
Operate the computer at full power. Do not use power-saving features.
Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that
checks files automatically in the background.
Do not use hard disk utilities, including those intended to enhance hard disk
access speed, as they may cause unstable operation and damage data.
Write from the computer's hard disk drive to the CD. Do not try to write
from shared devices such as a LAN server or any other network device.
Writing with software other than TOSHIBA Disc Creator or Ulead DVD
MovieFactory
operation with other software cannot be guaranteed.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/
RW, DVD-R/-RW/-RAM or DVD+R/+RW or HD DVD-R disc.
Do not perform any of the following actions when writing or rewriting:
Do not use shut down/log off and Sleep/Hibernation while writing or
rewriting.
Make sure writing or rewriting is completed before going into Sleep/
hibernation. Writing is completed if you can open the drive tray.
Set the computer on a level surface and avoid places subject to vibration
such as airplanes, trains or cars. Do not use an unstable surface such
as a stand.
Keep mobile phones and other wireless communication devices away
from the computer.
Always copy data from the hard disk drive to the CD. Do not use cut-
and-paste as the original data will be lost if there is a write error.
Satellite P200/Satellite Pro P200
®
for TOSHIBA has not been confirmed. Therefore,
Change users in the Windows Vista™ operating system.
Operate the computer for any other function, including using a
mouse or TouchPad/Dual Mode Pad or closing/opening the LCD
panel.
Start a communication application such as a modem.
Apply impact or vibration to the computer.
Install, remove or connect external devices such as USB devices, an
external display, i.Link devices or optical digital devices.
Use the audio/video control button to reproduce music or voice.
Open the drive.
About the HD DVD
5-21