Checking Connection With The Wireless Routing Center - Toshiba WRC-1000 User Manual

User's Manual
3. Verify that your Wireless LAN setting is identical to the router's default
wireless settings.
Checking Connection with the Wireless Routing
Center
You can use the Ping command to verify whether or not your Ethernet/Wireless
client is connected to the Wireless Routing Center.
To execute ping command, open a DOS window and ping the IP address of the
Wireless Routing Center at the DOS prompt. For example:
ping 192.168.10.1
If the following response occurs:
Reply from 192.168.10.1 bytes=32 time=100ms TTL=255
Then the connection between the Wireless Routing Center and the network is OK.
If you get a failed ping with the response of:
Request time out
Then the connection has not been made. Verify your network setting are correct.
For Ethernet client, also check the cable between the Wireless Routing Center and
the computer.
3-12