Table of Contents
Advertisement
2. Select the Wireless LAN Security page.
3. 802.1x group
Select Used in the 802.1x field.
Select the Enable radio button in the WEP Key Distribution field.
Select the 128bits radio button in the Key Length field.
4. RADIUS group
Select the 1 Enable radio button in the RADIUS Servers field.
Set a value in the IP Address field. Enter the IP address of the RADIUS
server. In this example, set 192.168.10.10.
Set a value in the Port field. In this example, set 1812.
Set a value in the Shared Secret field. Shared secret is a password for
communication between the access point and the RADIUS server. In this
example, set my shared secret. The characters you enter in this field will be
displayed as .
Set a value in the Time-out field. In this example, set 5.
Figure B-7 Setting the 802.1x and RADIUS groups window
Appendix B
B-11
Advertisement
Table of Contents
