To Enable Your Settings; Viewing System Overview And Log; Overview Configuration - Toshiba WRC-1000 User Manual

Wireless routing center

Hide thumbs Also See for WRC-1000:

Table of Contents

To enable your settings

After you have customized the settings, click the Apply button. The Wireless

Routing Center will begin registering the settings. You will be prompted to wait for

a few seconds. During this process, it is important not to turn the Wireless Routing

Center OFF or ON. The Wireless Routing Center could be damaged.

Figure 4-7 Apply changes

After the settings have been registered, the screen will return to the previous page.

You can then proceed with other configuration tasks.

Viewing system overview and log

Clicking the Overview link in the Status menu will display the Overview

Configuration page which shows the basic information of your Wireless

Routing Center, including the system, WAN/LAN interface and Wireless LAN

interface information. In addition to the general information, this page contains the

following elements:

Update button: Click the Update button on the top to update the overall status.

Language Selection: Lets you select the Web browser's encoding language:

English or Japanese.

WAN Interface: Information and buttons differ according to whether the

router's WAN/LAN relation is DHCP Client, PPPoE Client or Manual Config.

PPPoE Client: Displays the PPPoE client information. The Connect/Discon-

nect buttons let you manually launch/terminate your PPPoE session.

DHCP Client: Displays the DHCP client information. To update the IP information

assigned to the router's WAN port, click Release and then click Renew.

Manual Config: Displays the WAN port information you manually specified.

4-7

Table of Contents