Connection of Power cables/Earth wires/
2
Signal wires
Connect cables to the connectors and terminals specified.
REQUIREMENT
Power cable is not supplied for the Touch Screen Controller. Prepare a 3-pin power cable conforming
to applicable safety standards. Be sure to connect the earth line earth of the power cable securely.
Power input terminal
L
N
Power supply
Length of stripped
power cable
CAUTION
• Ensure to connect the breaker to the primary side of power.
Connect firmly the power
cable to the power input
terminal.
Length of stripped digital
Input/Output connector wire
35
10
45
10
Connect the attached
RS-485 cable to COM2.
COM2 (RS-485)
(TCS-NET relay interface)
35
10
5
Digital Input
Digital Output
For details of the connection,
refer to I/O port connection
on next page.
Ethernet
(To customer's PC)