Fostex FD-8 Owner's Manual page 117

<Tracks for simultaneous recording>
<Tracks for simultaneous playback>
<Program No.>
<Vari pitch.>
<Crossfade>
<Recording/reproducing frequency>
<Dynamic Range>
<Total harmonic distortion>
mode)
<Tempo map>
Signature : 1/4, 2/4, 3/4, 4/4, 5/4, 1/8, 3/8,
5/8, 6/8, 7/8, 8/8
Tempo : quarter note (1/4 note) = 30 ~ 250
* Input/Output
<RECORDER IN>
Connector
Input Impedance
Reference Input Level : -10dBV
<DATA IN/OUT>
Connector
Format
* Switch to either (1) or (2) depending on setup.
<MIDI IN/OUT>
Connector
Format
<PUNCH IN/OUT>
Connector
* For using optional Model 8051 foot switch)
<SCSI>
Connector
Protocol
Type of transmission : Asynchronous transmission
Connectable number of units : 2
SCSI-ID
* General
<Dimensions (mm)>
<Weight>
: 8 tracks (via optical adat)
: 2 tracks (via analog)
: 8 tracks
: Maximum 99 tunes
: +/-6%
: 10msec.
: 20Hz ~ 20kHz (typical)
: 90dB (typical)
: 0.008% (at mastering
: RCA pin jack (x2)
: 20k or higher
: Optical (x2)
: (1) IEC958 Part 3 (S/P DIF), (2)
Alesis Proprietry Multi Channel
Optical Interface (Adat Optical)
: DIN 5 PIN (x2)
: MIDI
: 6mm phone jack (x1)
: D-SUB 25 PIN (x1)
: SCSI-2, unbalanced
transmission line
: Automatic recognition
: 552 (W) x 110 (H) x 355 (D)
* Including highest protrusion.
: Approx. 5kg
Maintenance/Specifications
<Power supply>
<Power Consumption>
* Specifications and appearance are subject to change
without notice for product improvement.
*A.D.A.C. (Advanced Digital Audio Acoustic Coding)
A.D.A.C. is the next generation digital audio coding technique
maximized for multitrack recording which have been
developed by joint research of Matsushita Electric Industry
Corporation and Fostex Corporation.
* "Adat" and the "Adat symbol" are trademarks of Alesis
Corporation.
: AC 120V, 60Hz
: AC 230V ~ , 50/60Hz
: 15W
117