Sound And Volume Control; Change Voice - TomTom Urban Rider Owner's Manual

15. Voices
About voices
Voices
Your navigation device is able to provide spoken instructions and warnings using voices
which are stored on the device. Some voices have been recorded by actors and other
voices are computer-generated.
The recorded voices are only used for spoken instructions while the computer voices are
used for both spoken instructions and for reading aloud information stored on your map
such as, street names.
For information on downloading additional voices, visit tomtom.com.

Sound and volume control

To adjust the volume level, tap the left-hand section of the status bar in the Driving View.
The last spoken instruction is repeated and the volume level is shown.
Tap the glove-friendly plus and minus buttons to adjust the volume.
To turn the sound on or off, tap sound in the Main Menu.

Change voice

Change voice
Your navigation device is able to provide spoken instructions and
warnings using voices which are stored on the device. Some voices
have been recorded by actors and other voices are computer-gener-
ated.
The recorded voices are only used for spoken instructions while the
computer voices are used for both spoken instructions and for read-
ing aloud information stored on your map such as, street names.
To select a different voice on your device, tap Change voice in the
Voices menu. Then select a voice from the list. Computer voices are
clearly marked.
You can add and remove voices using TomTom HOME.
Note: If you select a recorded voice, this will only be able to
announce commands, but not street names. If you would like street
names to be announced, you will need to select a computer voice.
36