Toa C-BC850W Instruction Manual
Toa C-BC850W Instruction Manual

Toa C-BC850W Instruction Manual

Wall mounting bracket

Advertisement

WALL MOUNTING BRACKET
Thank you for purchasing TOA's Wall Mounting Bracket. Please carefully follow the instructions in this manual
to ensure long, trouble-free use of your equipment.

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
WARNING
When Installing the Unit
• Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.
Doing otherwise may result in the unit falling down and causing personal injury and/or property damage.
• Do not install the unit in the following locations to avoid a traffic accident or personal injury:
· Locations which block the driving of a car or somebody's passage.
· Locations where the traffic signal or road sign is hard to be seen.
• Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.
Doing so may result in the unit falling down and causing personal injury and/or property damage.
• Do not use other methods than specified to mount the bracket. Extreme force is applied to the unit and the
unit could fall off, possibly resulting in personal injuries.
• Use nuts and bolts that are appropriate for the ceiling's or wall's structure and composition. Failure to do so
may cause the unit to fall, resulting in material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after installation to prevent
accidents that could result in personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
INSTRUCTION MANUAL
C-BC850W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C-BC850W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toa C-BC850W

  • Page 1: Safety Precautions

    INSTRUCTION MANUAL WALL MOUNTING BRACKET C-BC850W Thank you for purchasing TOA's Wall Mounting Bracket. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. 1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation •...
  • Page 2 When Installing the Unit • Leave the installation of the unit to your TOA dealer because the installation requires expert experience and skills. The unit may fall off if incorrectly installed, resulting in possible personal injury.
  • Page 3: General Description

    2. GENERAL DESCRIPTION The C-BC850W Wall Mounting Bracket is designed to mount the C-CV854D-3 Vandal Resistant Day/Night Camera ( option ) to a wall. It also permits the camera to be mounted on a pole in conjunction with the optional C-BC450PM Pole Mounting Bracket and YS-60B Mounting Band ( option ) .
  • Page 4 4.2. Installation 1. Loosen 3 cover fixing screws to remove the wall mounting bracket. ( The cover is connected to the wall mounting bracket using the safety wire. ) 2. Attach the wall mounting bracket to a wall using 4 wall mounting screws ( M4 or M5 ) . Notes •...
  • Page 5 3. Fix the supplied M4 x 16 base mounting screws loosely to the joint base, then install the camera unit to the joint base using the supplied M4 x 12 camera mounting screws. Note When attaching the joint base, water-resistant treatment needs to be applied for the camera. For details, refer to the instruction manual attached to the camera.
  • Page 6: Specifications

    Note: The design and specifications are subject to change without notice for improvement. • Accessories Joint base ............... 1 Base mounting screw ( M4 x 16 with washer ) ....4 Camera mounting screw ( M4 x 12 ) ........ 4 URL: http://www.toa.jp/ 133-05-428-6A...

Table of Contents