Connecting A Speaker System To Your Sound Card - TerraTec SoundSystem Aureon 7.1 PCI Manual

Connecting a speaker system to your sound card

You can connect any commercially available active speaker system to your Aureon 7.1 PCI
sound card.
Ensure that the front port (3) is configured as "Line" using JP1.
After installing the drivers and software, select the correct speaker configuration in the Aureon
7.1 PCI Control Panel. (See the chapter on "The Aureon 7.1 PCI Control Panel".)
Connecting a 5.1 speaker system
Below is an illustration of the typical connection for a 6-channel (5.1) speaker system (the
required 2x cinch [RCA] to 3.5 mm jack connecting cables are normally included with your
speaker system, such as TerraTec HomeArena products).
Connecting a 7.1 speaker system
Below is an illustration of the typical connection for an 8-channel (7.1) speaker system (the
required 2x cinch [RCA] to 3.5 mm jack connecting cables are normally included with your
speaker system, such as TerraTec HomeArena products).
Connecting a stereo/4-channel speaker system
To connect a 4-channel speaker system, use only the front (3) / green and rear (4) / black
ports. For a 2 or 2.1-channel speaker system, use only the front (3) / green port of the sound
card.
SoundSystem Aureon 7.1 PCI (English) 7