Table of Contents
Advertisement
Sound architecture
The KOMPLEXER VST offers a sound structure with four layers. All four layers are always
saved for each sound. For each bank, 128 sounds with two wavetables are saved. The
four layers can be controlled either together via MIDI channel 5 or separately via MIDI
channels 1, 2, 3 or 4. Each layer has its own stereo output. In the OPTIONS menu, you
can mix all layers together to one stereo output. You can also use this architecture to
generate a multimode or surround sound with up to eight channels.
Effects FX1 and FX2 behave as follows: FX1 is available once for each layer, and FX2 is
available once for all layers. For each layer, you can define the effect mix for FX2 using
the Mix fader.
The sound layer structure
General operation
The KOMPLEXER VST has been optimized for a screen resolution of at least 1024x768
pixels. If your resolution is smaller, you either have to scroll or be limited to using the
smaller keyboard screen.
The KOMPLEXER VST has various operating elements, the behavior of which differs
according to the settings in the specific host used (linear/circular etc.).
Note: The faders can be moved with greater accuracy by simulta-
neously holding down the Shift key. Clicking the corresponding
fader or knob while holding down the Ctrl key resets the parame-
ters to the stored values.
8
KOMPLEXER Manual EN
Advertisement
Table of Contents
