Table of Contents
Advertisement
Other parameters on the main screen
LFO 1-3 - Control the speed of the LFOs (Low Frequency Oscillator); the same parame-
ters are also present on the ENV/LFO screen.
FILTER/AMP Envelope - Control the envelope curve times of the filter and volume (Amp)
envelope curves. On the main screen, you can control only Attack, Decay 1, Sustain 1
and Release. If a ADS1DS2R envelope curve is selected, Decay 2 and Sustain 2 are
controlled using the ENV/LFO screen. The same parameters are also available on the
ENV/LFO screen.
GLIDE - Generates a gliding or sliding transition effect between different notes (porta-
mento). You can select the time until the next note is reached using Time. The bottom
button activates a quantization that results in a staircase-shaped glide (glissando).
POLY/MONO - Activates monophonic or polyphonic playing mode.
UNISONO - Depending on the setting, Unisono lets up to six voices sound simultaneously
when a single key is pressed. Detune can be used to alter the tuning of one or more
voices relative to the other(s). Spread distributes the individual voices in the stereo
panorama. Unisono can be used to create extremely wide, dense sounds. This function is
particularly ideal for pads and aggressive lead sounds. However, be careful to not
overload the processor!
18
KOMPLEXER Manual EN
Advertisement
Table of Contents
