Table of Contents
Advertisement
MAIN screen
On the MAIN screen, advanced users can intervene more deeply in the sound structure.
The three oscillators, the mixer and the two filters are located in this screen. For faster
editing, the three LFOs and two envelopes are also placed here. For ease of operation on
the MAIN screen, you do not have to constantly switch screens in order to configure the
basic settings for a new sound. You can also edit the LFOs and ENVs in greater detail on
the ENV/LFO screen.
OSCILLATOR 1+2
(Pulse) or wavetable pointer position (WT) by clicking and dragging the waveform display.
From the drop-down menu under PWM, select the desired source for pulse width modula-
tion or wavetable. You can also switch off the oscillators using the buttons next to the
logo, for example to conserve CPU resources.
Wavetables - WT1 and WT2 are the two wavetables that can be selected for oscillators
1+2. A wavetable consists of 33 waveforms that are smoothly superimposed in real time,
KOMPLEXER Manual EN
Oscillators 1+2 are identical
except for a few details. You
can determine the basic pitch
using Octave, Coarse and
Fine. The six buttons for the
waveform are located below.
For the waveforms Pulse,
WT1 and WT2, you can
change
the
pulse
width
13
Advertisement
Table of Contents
