Teac UD-501 Owner's Manual page 12

Display (2)
During DSD audio input
When MODE DISP=OFF
Example
Signal type
When MODE DISP=ON, DSD AF=FIR1
Example
Reception method
Reception method
Nothing shown: DSD received without conversion (native)
DoP: DSD signal received by DoP (DSD over PCM) method
12
Sampling frequency
DSD analog FIR
lter setting
Automatic power saving status
When you shift the AUTO POWER SAVE switch on the rear
panel of the unit, the new setting is shown for about 2
seconds.
Switch setting
12 seconds before the automatic power saving function
puts the unit in standby mode, a countdown is shown on
the display.
Time until standby
One dot disappears each second until they have all disap-
peared and the unit enters standby.