Advertisement
The controls
FX LEVEL
Controls the level of the reverb. Notice that the level of the direct signal is always passed at the original
level (unity gain). Only the level of the reverb is changed when turning the FX level knob.
DECAY
The Decay knob sets the decay time of the reverb. Please note that the max. decay time on the
different reverb types varies due to the nature to the reverbs.
TONE
By adjusting the tone you change the emphasis on high and low frequencies in the reverb from dark to
crisp. The "best" setting is really a matter of how dominant you wish the reverb to sound.
PRE DELAY
Pre-delay is the time between the direct sound and the reverb. To keep the direct sound "in-your-face",
even with a long decay time and a high mix setting, try the long pre-delay setting.
REVERB TYPE selector
The Reverb Type selector allows you to select between the types described in the following section.
7
Advertisement
